gareth brown
Rock n' Roll Doggie VIP PASS
- Joined
- Nov 17, 2003
- Messages
- 6,593
Hi, I just bought a load scratchplate with Fat 50s in it and, embarrassing as it is, I'm a bit stumped by which wires to put where.
I've attached a photo of the inside of my strat (80's Japanese squier I believe) and the wires in there. One from the Jack socket, (two wires inside one grey coating...and) and the ground wire from the back of the body under the backplate.
Also attached a picture of the back of the wired pickups. I know I'm probably missing something really obvious but i've never had to do this before so any help would be appreciated!
I've attached a photo of the inside of my strat (80's Japanese squier I believe) and the wires in there. One from the Jack socket, (two wires inside one grey coating...and) and the ground wire from the back of the body under the backplate.
Also attached a picture of the back of the wired pickups. I know I'm probably missing something really obvious but i've never had to do this before so any help would be appreciated!