Morley ABY Switch

[Rockhound252]

Has anyone this pedal. Ive got one but when i connect the cables in this pedal i can see that the tone changes... Has anyone experimented that?

 

[the tourist]

Okay, here goes nothing:

When you use an ABY that is true bypass like the Morley ABY and use the A function OR the B function, they act just as though you're playing through one amp or the other. However, if you use the Y function, the box splits your signal, thus sending this weaker signal to the pedals/amp following. To avoid this, the use of a buffered ABY pedal, or to put a buffer (such as a boost pedal on a low setting that is always on) in front of your Morley, is better as the buffer strengthens your tone.

Does that make sense?

 

[U2-Experience]

Also to mention that the outputs are not isolated.
Means if you use it to connect amps for multi amping
you'll get a ground hum.

Alex

 

[Rockhound252]

I use morley to connect 2 guitars in A and B and the center jack in/out i connect pedals+amp

 

[the tourist]

I use morley to connect 2 guitars in A and B and the center jack in/out i connect pedals+amp

Ah, okay. I have no experience there. But I've heard Lehle is the best for ABY pedals.